Congratulations on the purchase of your Nasoni Da Vinci Fountain Faucet. Correctly installed and with sensible care, this product will give you many years of trouble-free service.
So, now what do you do? Do you plan to install the faucet yourself, or would you rather rely upon the services of a professional plumber? Before you proceed... We recommend you engage the services of a registered plumber in your area to install the widespread fountain faucet.
However, if you're ready and eager to install your own faucet, Nasoni offers these helpful hints. If you have not done this before, we suggest that you read the general faucet installation tips below. For instructions on installing your specific faucet, please follow the Maintenance and Installation instructions that were provided with your faucet. Please remember to flush the plumbing system before installing your fountain faucet.
CARE & MAINTENANCE
Wipe down your fountain faucet after use to avoid water spotting and mineral build up. Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the PVD finish in good condition.
Do not use proprietary abrasive liquids, powders, or pads to clean the tap. Do not use any products with ammonia bleach or limescale remover. You may damage the PVD finish and void your guarantee.
Items You'll Need for Installation:
Silicone sealant — Plumber's Putty is not generally recommended
Screwdriver (Phillips and slotted)
1. Install a 4" Centerset Fountain Faucet
2. Install an 8" Widespread Fountain Faucet
3. Install a 4" Nasoni Undercounter Water Filter